メカニカルシステムセミナー実施状況
Mechanical Systems Seminar
| No. | Date | Presenter | Title | Venue | Contact |
| 55 | 2009/11/17 (Tue) 15:00-17:00 |
182nd IDEC Asia Seminar Biomass Utilization in East Asian Countries | IDEC Bldg. Large Conference Room (1F) | Y. Matsumura | |
| Prof. Jin-Suk Lee (Bioenergy Research Center, KIER) | Recent developments and prospects of bioenergy in Korea | ||||
| Prof. Dehua Liu (Department of Chemical Engineering, Tsinghua University, CHINA ) | A Commercial Demonstration of Biorefinery of lipids：Integrated production for biodiesel and PDO | ||||
| 54 | 2009/4/28 (Tue) 16:20-17:00 |
Dr. Wentao HU (Department of Materials Science Yangshan University, China ) | High Level Expert Forum on Advanced X-ray Technology of Thin Film | Conference Room (A3-126) | G. Sasaki |
| 53 | 2009/2/24 (Tue) 15:00-17:00 |
Dr. Xu HE (Assistant Professor, State Key Laboratory of Automotive Safety and Energy, Department of Automotive Engineering, Tsighua University, China ) | Laser Induced Incandescence (LII) Measurement of Soot in Flames | Conference Room (A3-126) | K. Nishida |
| Introduction of State Key Laboratory of Automotive Safety and Energy, Tsinghua University, China | |||||
| 52 | 2008/12/10 (Wed) 15:00-17:00 |
Prof. Derek Dunn-Rankin ( University of California, Irvine, USA ) | Secondary Air Injection in Miniature Liquid Fuel Film Combustors | Conference Room (A3-126) | S. Ishizuka |
| 51 | 2008/11/20 (Tue) 13:10-14:40 |
Prof. Thomas H. North (Department of Materials Science & Engineering Faculty of Applied Science and Engineering University of Toronto, Canada ) | Research interaction between University of Toronto and Hiroshima University | LR-218 | M. Yamamoto |
| Friction stir spot welding for automobile industry | |||||
| 50 | 2008/11/18 (Tue) 13:30-15:00 |
Dr. Erik Johnson (Niels Bohr Institute, Nano Science Center University of Copenhagen, Denmark Division of Materials Research, Risø DTU, Roskilde, Denmark ) | Lead inclusions in aluminum -- a model system for nanoscale properties | Conference Room (A3-126) | K. Sugio |
| 49 | 2008/10/27 (Mon) 13:50-15:00 |
Nanthavan Ya-anant (Thailand Institute of Nuclear Technology, Radioactive Waste Management Center, Thailand ) | Radioactive Waste Management in Thailand | Conference Room (A3-126) | R. Hazama K. Shizuma |
| Dr. Nils Baumann (Research Center of Dresden-Rossendorf, Institute of Radiochemistry, Germany ) | Ecological problems in Saxony related to the former uranium mining activities - fluorescence spectroscopy, a tool for analyzing the uranium binding form | ||||
| 48 | 2008/10/31 (Fri) 15:00-16:30 |
Prof. Dr. Harry L. Trentelman (Faculty of Mathematics, University of Groningen, Netherlands ) | Model reduction by balancing of dissipative behaviors with error bounds | LR-116 | I. Masubuchi |
| 47 | 2008/10/3 (Fri) 13:30-14:30 |
Dr. Frank ZHAO (Vice President, CTO, Zhejiang Geely Holding Group Co., Ltd, Fellow of SAE International) | Recent Situation of Chinese Automobile Industryand Career Making from China , through Japan , England and USA , to China | LR-110 | K. Nishida |
| 46 |
2008/8/12 (Tue) |
Dr. Lucas da Silva (Departamento de Engenharia Mecanica e Gestao Industrial,Faculdade de Engenharia da Universidade do Porto） |
Methods to improve the joint strength of adhesive joints | Conference Room (A3-126) | T. Sawa T. Iwamoto |
| 45 | 2008/3/7 (Fri) 13:30-14:30 |
Dr. Efim Gluskin (Advanced Photon Source, Argonne National Laboratory) | Accelerator and X-Ray Science at the Advanced Photon Source | Hiroshima Synchrotron Radiation Center Conference Room (4F) | K. Nishida |
| 44 | 2007/11/30 (Fri) 9:00-17:40 |
The Inter-University Research Seminar (IURS) 2007 | Central Library, Library Hall | K. Shinozaki | |
| Prof. S. Kou | Dissimilar Filler Metals and Fusion-Boundary Macrosegregation in Welds | ||||
| Dipl.-Phys.Ing. B. Krebs | Soldering of Glass-Steel Hybrid Structures for Applications in The Construction Industrye | ||||
| Prof. H. Kokawa | Grain boundary engineering of austenitic stainless steels by one-step thermomechanical processing | ||||
| Dr. T. Osuki | Analysis of solidification process of austenitic stainless steel weld metal using synchrotron | ||||
| Prof. T.H. North | The Double Spiral and Welding Parameter Selection during Friction Stir Spot Welding | ||||
| Prof. G. Racineux | Tool geometry and processing conditions for FSW with conical tool | ||||
| Prof. A. Fuji | Interlayer Growth and Fracture at Interface of Pure Aluminium/Pure Nickel Friction Welding Joint | ||||
| Prof. M. Kashani | Welding of Aluminium Alloys and High Strength Steel Sheets by Magnetic Pulse Welding Technique | ||||
| Prof. M. Mayer | New Methods to Characterize Fine Wires for Microelectronic Ball Bonding | ||||
| Prof. J.E. Indacochea | Interfacial Aspects of Ceramic-Metal Bonding | ||||
| Prof. K. Ikeuchi | Hydrogen Embrittlement of Multipass MAG Weld Metal for HT780 Class Steel | ||||
| Prof. C.Y. Kang | Hardness Characteristics of Laser Welded Advanced High Strength Steels for Automotive | ||||
| Dr. I. Khan | Effect of Weld Microstructure on the Static and Impact Performance of Resistance Spot Welded (RSW) Dual Phase Steels | ||||
| Prof. K. Saida | Weldability of Ultra High-Purity Stainless Steels | ||||
| Prof. K. Shinozaki | Development of Evaluation Method for Solidification Cracking Susceptibility of Inconel600/SUS347 Dissimilar Laser Weld Metal by In-situ Observation | ||||
| 43 | 2007/10/2 (Tue) 15:00-16:00 |
Tawatchai Charinpanitkul (Associate Professor, Center of Excellence in Particle Technology, Faculty of Engineering Chulalongkorn University, Payathai Rd., Patumwan, Bangkok, THAILAND) | Challenges of supercritical fluid technology for nanoparticle and renewable energy applications in Chulalongkorn University | Conference Room (A3-126) | Y. Matsumura |
| 42 | 2007/5/14 (Mon) |
Joint Research Seminar University of Leeds & Hiroshima University | Conference Room (A3-126) | ||
| Prof. Andy. C. McIntosh ( University of Leeds) | Biomimetics - Fire and Explosion in Nature | ||||
| Dr. Daisuke Shimokuri ( Hiroshima University) | Combustion Oscillation in a Tubular Flame Burner | ||||
| Prof. Andy. C. McIntosh ( University of Leeds) | Pressure Interactions with Premixed Flames | ||||
| Prof. Takuma. Endo ( Hiroshima University) | Experiments on Water-Cooled Single-Tube Pulse Detonation Engine | ||||
| 41 | 2006/12/5 (Tue) 13:30-15:30 |
Prof. In-Seuck Jeung (Aerospace Propulsion & Combustion Laboratory Department of Aerospace Engineering, Seoul National University) | Supersonic Combustion in a Model Scramjet Engine of HyShot Flight Test | Conference Room (A3-126) | S. Ishizuka |
| 40 | 2006/11/30 (Tue) 13:00-15:00 |
Dr. Erol Sancaktar (Professor, Department of Polymer Engineering Institute of Polymer Engineering Adjunct Professor Department of Mechanical Engineering The University of Akron Akron, OH, USA) | From Micro to Nano, Some Research Examples in Polymers and Polymer Based Composites | Conference Room (A3-126) | T. Sawa |
| 39 | 2006/11/8 (Wed) 9:15-10:15 |
Prof. ROBERT, J. KEE ( Colorado School of Mines) | The effects of rotation rate on the characteristics of premixed propane–air swirling tubular flames | Conference Room (A3-126) | S. Ishizuka |
| 2006/11/8 (Wed) 10:30-12:00 |
Prof. ROBERT W. PITZ ( Vanderbilt University) | EXPERIMENTAL AND NUMERICAL INVESTIGATION OF PREMIXED TUBULAR FLAMES | |||
| Prof. JAY P. GORE (Thermal Sciences and Propulsion Center, School of Mechanical Engineering, Purdue University) | An Experimental Realization of Premixed Methane/Air Cylindrical Flames | ||||
| 38 | 2006/11/8 (Wed) 9:15-10:15 |
A. Kruse (Institute for Technical Chemistry, ITC-CPV, Forschungszentrum Karlsruhe) |
Hydrothermal biomass gasification ：Impact of the biomass ingredients and reactor type | Conference Room (A3-126) | Y. Matsumura |
| 37 | 2006/10/18 (Wed) | Joint Research Seminar University of Leeds & Hiroshima University | Conference Room (A3-126) | ||
| Prof. T. H. C. Childs ( University of Leeds) | Manufacturing Researches in the School of Mechanical Engineering University of Leeds, UK | ||||
| Prof. Keiji Yamada ( Hiroshima University) | Detection of Chip Inclusion to Avoid Machining Error for MC (Machining Center) | ||||
| Prof. Vassili V. Toropov ( University of Leeds) | Reliability and Robustness Assessment of Engineering Systems | ||||
| Prof. Ryutaro Hino ( Hiroshima University) | Optimum Design for Metal Forming Process Using Numerical Optimization and FE Simulation | ||||
| Prof. Kikuo Okuyama ( Hiroshima University) | Synthesis of Nanoparticles and Nanocomposites : Research in METI/NEDO Nanotechnology Project | ||||
| 36 | 2006/10/5 (Tue) 10:30-11:30 |
Prof. Michael Jerry Antal, Jr. (Distinguished professor Coral Industry Chair Hawaii Natural Energy Institute University of Hawaii at Manoa) | Biocarbons from the Lignocellulosic Residues of Biodiesel and Bioethanol Production | Conference Room (A3-126) | Y. Matsumura |
| 35 | 2006/9/5 (Tue) | Joint Research Seminar National Central University ( Taiwan ) & Hiroshima University | Conference Room (A3-126) | ||
| Dr. Biing Hwa Yan ( National Central University) | Development of Micro Hole Machining Technology by Micro Electro-Discharge Machining (MEDM) | ||||
| Dr. Yasuo Yamane ( Hiroshima University) | Drilling with MQL Process | ||||
| Dr. Lih-Wu Hourng ( National Central University) | The Current Status on the Electrochemical Machining Technology | ||||
| Dr. Keiji Yamada ( Hiroshima University) | The Strategy of Laser Cleaving Process of Brittle Materials | ||||
| Dr. Yean-Ren Hwang ( National Central University) | The Academic Program of Opto-Mechatronics Engineering | ||||
| Dr. Hiroyuki Suzuki ( Hiroshima University) | Introduction to an International Internship Program “ECBO” | ||||
| Dr. Jiunn-Chi Wu ( National Central University) | Modeling and Fabrication of Microfludic Devices | ||||
| Dr. Hiroshi Maekawa, ( Hiroshima University) | Acoustic Wave Radiation Due to Coherent Vortex Supersonic Wake | ||||
| 34 | 2006/8/25 (Fri) 10:30-11:15 |
Prof. Zuohua HUANG | The School of Energy & Power Engineering at Xi'an Jiaotong University | Conference Room (A3-126) | K. Nishida |
| 33 | 2006/9/6 (Wed) 13:30-15:30 |
Dr. Graham WIGLEY (Senior Research Fellow Department of Aeronautical, Automotive and Systems Engineering, Loughborough University, UK ) | Air-Fuel Mixing in a Homogeneous DISI Engine at Part Load with a Fully Variable Valve Train System | Conference Room (A3-126) | K. Nishida |
| 32 | 2006/8/10 (Tue) 10:30-12:00 |
Prof. Roman Nowak (Department of Materials Science & Engineering, Helsinki University of Technology, Finland ) | Non-dislocation origin of the incipient plasticity | Conference Room (A3-126) | F. Yoshida |
| 31 | 2006/6/5 (Mon) 16:00-17:00 |
Prof. Norman E. Dowling (Engineering Science and Mechanics Department, Virginia Polytechnic Institute and State University) | A REVIEW OF FATIGUE LIFE PREDICTION METHODS | Conference Room (A3-126) | A. Sugeta |
| 30 | 2005/11/9 (Wed) 13:30-14:30 |
D. L. Yu (Professor, Yanshan University) | Academic exchange between Hiroshima University and Yanshan University in this past years and its future | C3-326 | K. Matuski |
| 29 | 2005/11/4 (Fri) 9:00-10:00 |
Dr. Jeffrey S. Tolan (Chief Researcher, Iogen Corporation) | Ethanol production from biomass resources: Technology development in IOGEN | Conference Room (A3-126) | Y. Matsumura |
| 28 | 2005/9/13 (Tue) 13:50-15:00 |
Prof. Mohamed Abdul Rahman ( School of Chemical Engineering Engineering Campus, Universiti Sains Malaysia ) | Catalytic Decomposition of Methane for the Production of Nanotubes and Hydrogen in a Single Step | Conference Room (A3-126) | Y. Matsumura |
| Dr. Keat Teong Lee (Lecturer School of Chemical Engineering Engineering Campus, Universiti Sains Malaysia ) | Production of Green Fuel From Palm Oil Biomass Using Supercritical Water Technology | ||||
| 27 | 2005/5/30 (Tue) 10:00-12:00 |
Prof. Changlin Wu (Hua zhong University of Science and Technology) | 21st century oriented educational revolution on mechanical engineering | Conference Room (A3-126) | N. Nakagawa K. Nagamura |
| 26 | 2004/12/6 (Mon) 13:30-14:30 |
Dr. Michael J. ANTAL ( UNIVERSITY OF HAWAI‘I Coral Industries Chair, Distinguished Professor of Renewable Energy Resources Hawaii Natural Energy Institute (HNEI)) | Thermochemical conversion of biomass--New and old technologies | Conference Room (A3-126) | Y. Matsumura |
| 25 | 2004/10/25 (Mon) 10:00-12:00 |
Dr Vassili Toropov (Altair Engineering, UK ) | Robustness and reliability of engineering systems: analysis and optimization | Conference Room (A3-126) | F. Yoshida |
| 24 | 2004/9/24 (Fri) 13:30-14:00 |
Dr. Michael Specht (Center for Solar Energy and Hydrogen Research, Baden-Wuerptenberg) | The European R&D-Project AER-Gas | C3-326 | Y. Matsumura |
| 23 | 2004/5/21 (Fri) 15:00-16:00 |
Prof. Michael Bargende ( University of Stuttgart, Germany ) | Homogeneous Charge Compression Ignition with Diesel Fuel and Gasoline － The Future Combustion in IC Engines? － | Conference Room (A3-126) | K. Nishida S. Ishizuka |
| 22 | 2004/4/14 (Wed) 15:00-17:00 |
Prof. Andrzej Teodorczyk ( Warsaw University of Technology, Poland ) | Gaseous Detonation Structure and Dynamics | Conference Room (A3-126) | S. Ishizuka K. Nishida S. Taki T. Endo T. Yatsuhusa |
| 21 | 2004/2/20 (Fri) 13:30-15:00 |
Prof. ZORAN S. NIKOLIC (Professor of Materials Science, University of Nish, Faculty of Electronic. President of the Senate of University of Nish (2002-2004) Guest Professor Materials and Structures Laboratory, Tokyo Institute of Technology, Japan ) | Computer Simulation of Liquid Phase Sintering | Conference Room (A3-126) | H. Kuroki |
| 20 | 2003/10/28 (Tue) 13:30-15:00 |
Prof. A.N.Kumar (Materials Science Group, Department of Applied Mechanics, Indian Institute of Technology, New Delhi) | Fracture and Crack Growth Resistance Behaviour of γ-Titanium Aluminide Fracture Resistance Behaviour of Special Ceramics for SOFS (Solid Oxide Fuel Cell) Applications | Conference Room (A3-126) | K. Nakasa |
| 19 | 2003/10/1 (Wed) 15:00-16:30 |
Prof. O.T. Bruhns ( Institute of Mechanics, Ruhr-University Bochum, Germany ) | Constitutive Relations for Finite Elastoplasticity | Conference Room (A3-126) | F. Yoshida |
| 18 | 2003/8/5 (Tue) 11:00-11:50 |
Prof. Yoon Han Ki | Fracture Resistance Evaluation of Ceramic Composites | A3-424 | G. Sasaki |
| 17 | 2003/8/6 (Wed) 15:00- |
Dr. Shaju K. Albert (Scientific Officer Materials Joining Section Indira Gandhi Centre for Atomic Researcah. National Institute for Materials Science, Tsukuba, Japan) | Hardfacing of 316L Austenitic Stainless Steel with a Ni based alloy for use in Fast Breeder Reactors | Conference Room (A3-126) | T. Ri |
| 16 | 2003/8/5 (Tue) 10:00-12:00 |
Prof. Moshe Matalon (Department of Engineering Sciences & Applied Mathematics, Northwestern University, Evanston, IL, USA ) | Flame Propagation in Channels | Conference Room (A3-126) | S. Ishizuka |
| 15 | 2003/6/27 (Fri) 13:30-15:30 |
Dr. Valentin A. Soloiu
(Senior Lecturer Engine Dynamics Faculty of Mechanical Engineering, The Polytechnic University of Bucharest Romania ) |
The Development of a New Emulsified Alternative Fuel for Power Generation, Produced from Waste Plastics | LR-114 | K. Nishida |
| 14 | 2003/5/23 (Fri) 13:30-15:00 |
Dr. Chris P. Thomas
(Supervisor Power Train Technical Planning, DaimlerChrysler, USA ) |
Challenges of Auto Industry: Perspective on the Challenges of Fuel Economy, PZEV Emissions Standards, and Drivability | Conference Room (A3-126) | |
| 13 | 2002/12/6 (Fri) 15:30-16:30 |
Dr. Zhang Bo | Comprehensive Stress Analysis and Shell Deformation Study of Basic Oxygen Furnace | Conference Room (A3-126) | K. Nakasa |
| 12 | 2002/11/5 (Mon) 11:00-12:00 |
Dr. Michael FORSTH | Laser Diagnostics and Chemical Modeling of Catalytic Combustion | Conference Room (A3-126) | K. Nishida |
| 11 | 2002/9/9 (Mon) 10:30-12:00 |
Dr. Zoran FILIPI | System Approach to Analysis of Hybrid Powertrain Technologies | Conference Room (A3-126) | |
| 10 | 2002/8/30 (Fri) 11:00-12:00 |
Prof. Brain Edward MILTON | Generation and Analysis of Impact Driven Water and Diesel Fuel Jets in Low to High Supersonic Ranges | Conference Room (A3-126) | K. Nishida |
| 9 | 2002/8/21 (Wed) 13:30-15:00 |
Prof. Zunhua HUANG | Combustion Characteristics of Alternative Fuels in Engines | Conference Room (A3-126) | K. Nishida |
| 8 | 2002/7/30 (Tue) 17:00-18:00 |
Dr. Robert J Kee. | An Introduction to Chemkin and The Formation of Ultra-Thin Silicon-Oxide Films Using Combustion Processes | Conference Room (A3-126) | S. Ishizuka |
| 7 | 2002/7/26 (Fri) 11:00-12:20 |
Dr. M. J. Antal, Jr. | The Reaction of Biomass in Hot Water | LR-115 | Y. Matsumura |
| 6 | 2002/6/25 (Tue) 16:30-17:30 |
Prof. Vladimir Zarko (Institute of Chemical Kinetics and Combustion, Novosibirsk Russia ) | Review of Solid Propellant Combustion Research | C3-326 | S. Ishizuka |
| 5 | 2002/6/20 (Tue) 13:10-14:40 |
Dr. Laurent ZIMMER (The National Aerospace Laboratory of Japan ) | Particle Imaging Velocimetry in Spray Application in Isothermal and Combustion | LR-116 | K. Nishida |
| 4 | 2002/5/24 (Fri) 15:00-17:00 |
J. M. McDonough | A Different Approach to Large-Eddy Simulation with Advantages for Computing Turbulence-Chemical Kinetics Interactions in Turbulent Combustion Particle | Conference Room (A3-126) | S. Ishizuka |
| 3 | 2002/5/7 (Tue) 10:00-12:00 |
Geng Lin (Harbin Institute of Technology) |
SiC-Al Interface in a SiCw/Al Composite | Conference Room (A3-126) | G. Sasaki |
| 2 | 2002/4/17 (Wed) 17:00-19:00 |
Prof. Vassili V Toropo ( School of Engineering, University of Bradford) | Global and mid-range approximations for design optimization and inverse problem | Conference Room (A3-126) | F. Yoshida |
| 1 | 2002/4/16 (Tue) 17:00-19:00 |
Prof. Vassili V Toropo ( School of Engineering, University of Bradford) | Evolutionary optimization techniques and response surface methodology for design optimization and inverse problems | Conference Room (A3-126) | F. Yoshida |